The INTERTHERM 228 Datasheet is a crucial document for anyone involved in protecting steel structures from corrosion, especially in demanding environments. It provides detailed information about Intertherm 228, a widely used epoxy phenolic coating designed for high-temperature service and immersion conditions. Understanding the details within the INTERTHERM 228 Datasheet is key to successful application and long-term performance of this protective coating.
Decoding the INTERTHERM 228 Datasheet A Comprehensive Guide
The INTERTHERM 228 Datasheet isn’t just a piece of paper; it’s a treasure map to achieving optimal corrosion protection. It outlines the coating’s properties, application guidelines, and performance characteristics. Primarily, INTERTHERM 228 is a two-component, heat-resistant epoxy phenolic coating. This means it is supplied as two separate components (a base and a hardener) that must be mixed together before application. Its main function is to provide corrosion protection to steel surfaces operating at elevated temperatures or exposed to corrosive environments. The datasheet provides precise mixing ratios and induction times (the time needed after mixing before application) to ensure proper curing and optimal performance.
These datasheets are used by a variety of professionals, including:
- Coatings applicators: To ensure proper mixing, application thickness, and curing conditions.
- Engineers: To specify the coating for projects based on its performance characteristics and suitability for the intended environment.
- Inspectors: To verify that the coating has been applied correctly and meets the required specifications.
Therefore, understanding the information is essential for a successful and long-lasting coating application.
Key aspects covered in the INTERTHERM 228 Datasheet usually include:
- Product Description: A general overview of the coating and its intended use.
- Physical Properties: Information such as volume solids, density, and flash point.
- Application Details: Guidelines on surface preparation, mixing ratios, application methods, and curing schedules.
The datasheet will also often include a table summarizing key performance characteristics, such as resistance to various chemicals and temperatures. For instance:
| Property | Typical Value |
|---|---|
| Temperature Resistance (Dry) | Up to 200°C (392°F) |
| Immersion Service | Resistant to various chemicals (refer to datasheet) |
To maximize the benefits of INTERTHERM 228 and ensure correct usage, please consult the most current INTERTHERM 228 Datasheet provided by the manufacturer, International Paint.