The LPC2368FBD100 Datasheet is the key to understanding and utilizing the capabilities of the LPC2368FBD100 microcontroller from NXP Semiconductors. This document provides comprehensive technical specifications, pinout diagrams, electrical characteristics, and application information necessary for engineers and hobbyists to design and implement embedded systems using this powerful ARM7TDMI-S based device.
Deep Dive into the LPC2368FBD100 Datasheet
The LPC2368FBD100 datasheet serves as the primary reference for anyone working with this microcontroller. It is a treasure trove of information detailing every aspect of the device, from its core architecture to the intricacies of its peripherals. Without a thorough understanding of the datasheet, attempting to use the LPC2368FBD100 effectively is a daunting task. Understanding the datasheet ensures proper device operation and prevents costly design errors. The document describes the microcontroller’s features such as:
- ARM7TDMI-S core
- Up to 512 KB of Flash memory
- Up to 58 KB of SRAM
- Ethernet MAC
- USB 2.0 Full Speed
Datasheets are crucial during the design phase of any embedded system. They allow engineers to assess the suitability of the LPC2368FBD100 for a specific application by providing detailed information on its performance characteristics under various operating conditions. This includes data on power consumption, clock speeds, and the timing requirements of different peripherals. The datasheet enables informed decisions regarding component selection, ensuring that the microcontroller can meet the demands of the intended application. They include:
- Electrical Characteristics (Voltage, Current)
- Timing Diagrams
- Pin Descriptions
Furthermore, the LPC2368FBD100 datasheet outlines the register map of the microcontroller, which is essential for programming the device. Each peripheral, such as the UART, SPI, or ADC, has a set of registers that control its operation. By consulting the datasheet, developers can understand the function of each register and write code to configure the peripherals according to the application’s requirements. For instance, the configuration settings for the various peripherals can be found by reading the datasheet’s peripheral sections. A simplified example might be represented as:
| Register | Address | Description |
|---|---|---|
| UART0_LCR | 0xE000C00C | Line Control Register for UART0 |
Ready to explore the comprehensive details and unlock the full potential of your project? Consult the official LPC2368FBD100 datasheet. It’s your direct line to all the specifications, features, and operational insights you need to succeed.